Search
Tuesday, January 06, 2009 ..::  ::.. Register  Login
 Message Forums Minimize
Forums > Fast Lane Machine Products > Savage Products
Subject: Servo and servo plate mounting options
Forums Moderate Search
You are not authorized to post a reply.
Author Messages
savagefan
Posts:6
Posted:3/13/2006 6:09:23 AM
I think i have seen the light
After installing my new FLM servo plate i found out that the throttle servo wouldn't fit anymore. Because i didn't want to mount any T-Maxx parts on my Savage but still keep using the stock or upgraded aluminum throttle and braking linkage i simply made a few spacers from 1.2cm
and putted them between the servo and servo plate.
Put two longer screws in it and everything is in place as i think it should be.

So maybe a little tip for FLM manufactures, make some nice alloy spacers (bridges)between the steering servo and your servo plate.
The next advantage is also that nobody has to go shopping around for another fuel tank because the stock tank can also remain his old position.

Is that an idee yes or not?

Greetings Dennis
from The Netherlands
You are not authorized to post a reply.


ActiveForums 2.2
  

 Banners Minimize
  

Copyright 2000-2008 Fast Lane Machine   Terms Of Use  Privacy Statement