|
|
|
|
|
Message Forums |
 |
|
|
You are not authorized to post a reply. |
|
| Author |
Messages |
virusss
Posts:3
|
| Posted:2/1/2006 4:15:35 PM |
|
Hallo boys i am Italian, and i have a big problem whit savage bulkless, i dont I do not succeed to mount the servo saver because' touches on the case of differential,how I can make?
Please help me thanks
|
|
serum
Posts:13
|
| Posted:2/1/2006 4:25:48 PM |
|
| http://www.fastlanemachine.com/PublicPortal/Forums/tabid/65/forumid/3/postid/26/view/topic/tpage/3/Default.aspx
|
|
virusss
Posts:3
|
| Posted:2/2/2006 9:16:01 AM |
|
| Sure it seems absurd to have to me to cut a product as soon as bought...
|
|
admin
Posts:226
|
| Posted:2/6/2006 11:41:37 AM |
|
We are now aware of this problem with the stock servo saver. We new it would be close when designing the Hybrid, but when 1st pieces were done we did not notice a problem because our servo saver bar was not stock and had sufficient clearence.
The best thing to do is trim a little material from the servo saver bar and all is good.
This will be fixed on the next production run.
If anyone has this same problem we will send you a new Aluminum Servo Saver bar that will give clearence with the Hybrid.
Let me know via e-mail and make sure to provide your address.
|
|
virusss
Posts:3
|
| Posted:2/6/2006 11:50:09 AM |
|
Thanks for the support, i have sent to you my address for shipment of servo saver bar.
Thanks very much
|
|
alowishious
Posts:2
|
| Posted:2/11/2006 5:55:16 PM |
|
I too am havign the same problem. I emailed you my address for the servo bar. Cant wait to get it cause so far these things look awesome on my truck!!!!!!
Chris
|
|
HPISavageRC
Posts:9
|
| Posted:2/11/2006 7:56:15 PM |
|
| Post some pics alowishious!
|
|
alowishious
Posts:2
|
| Posted:2/13/2006 12:04:44 PM |
|
| http://www.savage-central.com/modules.php?name=Forums&file=viewtopic&t=52098
|
|
|
|
You are not authorized to post a reply. |
|
ActiveForums 2.2
|
|
|
|
|
Banners |
|
|
|
|
|
|
|
|
|
|
|
|
|