|
|
|
|
|
Message Forums |
 |
|
|
You are not authorized to post a reply. |
|
| Author |
Messages |
savagemaxx
Posts:15
|
| Posted:10/25/2005 11:12:10 PM |
|
| Got a question on throttle linkage. I am using a HPI 21 engine with the FLM extended chassis. I'm sure some of you make know what I can use to make a throttle linkage. The Stock one is short and I dont know the size of the rod for the linkage or where I may be able to get a length of it I can bend and cut myself. Thanks in advance for any suggestions.
|
|
admin
Posts:226
|
| Posted:10/26/2005 11:53:43 AM |
|
Were do you have your throttle located?
You shoud be able to go to your LHS and buy the linkage from a Nitro Rustler or something along those lines.
It has been so long since I had the stock set-up I cannot remember exactly what was used.
|
|
savagemaxx
Posts:15
|
| Posted:10/28/2005 7:14:59 PM |
|
| No problem. I actually bought a length of threaded rod from the local hobby shop and worked great. I just figured you may have had a better idea. Thanks for the response.
|
|
|
|
You are not authorized to post a reply. |
|
ActiveForums 2.2
|
|
|
|
|
Banners |
|
|
|
|
|
|
|
|
|
|
|
|
|