Search
Thursday, November 20, 2008 ..::  ::.. Register  Login
 Message Forums Minimize
You are not authorized to post a reply.
Author Messages
cojack
Posts:3
Posted:10/26/2006 8:59:18 AM
Just got F/R combo bulk heads,Very nice. The front went together well as the rear.On the rear the differential output yokes dont go all the way on the output gear shaft,so the screw yoke pin wont go in the hole.
the front bulk head are deeper for the output yokes to fit all the in for the yoke pins to fit in the hole which line up no worries.
The rear are not as deep so the output yokes hit the bulk heads before the holes line up for the yoke pins, To go in.

Any help please,cheers
cojack
Posts:3
Posted:10/31/2006 5:12:56 AM
No replys,

Is there a drive shaft that fits the combo bulks as they are not machined as deep as the front.For the slide axel to fit the diff out drive,No one had this problem before.

I think i swap for anther front and try to fit it up.

cheers
cojack
Posts:3
Posted:11/9/2006 5:23:04 AM
Well i got the 17500 combo bulk fitted to the rear.My truck is back on the road,No reply from the supplier in austraila to what may have been the wrong with the 18500 rear combo bulk.
admin
Posts:226
Posted:11/27/2006 5:44:06 PM
Did you install them on the new 3.3 T-maxx? If so that would have been the problem. We have updated the program now to accept the new shafts.

You are not authorized to post a reply.


ActiveForums 2.2
  

 Banners Minimize
  

Copyright 2000-2008 Fast Lane Machine   Terms Of Use  Privacy Statement