Search
Thursday, November 20, 2008 ..::  ::.. Register  Login
 Message Forums Minimize
You are not authorized to post a reply.
Author Messages
admin
Posts:226
Posted:7/6/2006 6:13:09 PM
While we were working on the Hybrid bulk we decided to hold off a bit. We decided to design a drop in Hybrid diff case that uses 1/8 scale buggy gears.
The reason being:
1. These are a little less complex than the Hybrid bulk (the more complex the longer to prototype)
2. Cost, the Revo Hybrid will be the most expensive hybrid to date (just look at the Revo bulk, alot of material and alot of holes with different angles). The Hybrid diff case will be an alternative to the Hybrid bulk with a far less cost.
3. We have a few designs that will allow the diff case to be a drop in using all the stock drive shafts (for an alternative to CVDs, although a CVD diff kit will also be available).

Our approach and motto has always been, to design and build some awesome parts at an awesome price.

These Hybrid diff cases are just a lower cost alternate to a bullet proof drivetrain.

I will have some pics up on the site sometime tomorrow.



DRevo
Posts:2
Posted:7/8/2006 5:18:21 PM
This is GREAT news! When will be the release date on these? Post some pics on the site already!
squeeforever
Posts:4
Posted:7/9/2006 6:54:15 PM
Will it be possible to compensate gearing on a nitro revo??
DRevo
Posts:2
Posted:7/12/2006 7:58:50 PM
Where are the pics? its been a while now...
RC-Monster Mike
Posts:2
Posted:7/13/2006 10:29:49 PM
This link will take you to the prototype picture:


http://www.rc-monster.com/forum/showthread.php?p=54055#post54055
RC-Monster Mike
Posts:2
Posted:7/13/2006 10:33:08 PM
I guess you have to copy and paste the link to your browser to check out the pictures.
admin
Posts:226
Posted:7/13/2006 10:34:07 PM
Thanks Mike.

I had a problem getting the picture loaded up on the site, and did not have time to get it sorted out.
squeeforever
Posts:4
Posted:12/9/2006 8:19:28 PM
Any news on these yet?
ALUCARD
Posts:18
Posted:3/31/2007 10:46:59 PM
Still any news? Price?
savageoner
Posts:2
Posted:4/2/2007 4:14:05 PM
Any news? Did FLM fall off the face of the earth? Did the Admin die? Is FLM going under? I need news!!!
CCristo
Posts:6
Posted:4/3/2007 9:06:02 AM
They are out and available from RC-Monster
http://www.rc-monster.com/proddetail.php?prod=rcmflmrvdf
serum
Posts:13
Posted:4/11/2007 1:36:28 PM
Got them here! they work like a champ...

I took the 10/43's. Make sure, that if you use them on a nitro revo or a normal e-revo to get the 13/43 pinion/ringgear
You are not authorized to post a reply.


ActiveForums 2.2
  

 Banners Minimize
  

Copyright 2000-2008 Fast Lane Machine   Terms Of Use  Privacy Statement